Home         Products         Tech Articles         Customer Rigs        Trail Rides        Place Order 

Listed on this page:

Product News, Updates, and Sales

2002-07 KJ Rock Monitor Front Bumper

2008+ KK Rock Monitor Front Bumper

Currently in Development

Rock Monitor Convertible Winch Bumper

for 2002-07 Jeep Liberty KJ

Designed to fit 02-04 and 05-07 Liberty KJ and 2008 Liberty KK.  Our new Convertible Winch Bumper is easily customizable to your needs.  The bumper is extremely high clearance and tucked in close to the Liberty, so you get incredible approach angle, which is critical on the Liberty due to limited lift height options and IFS that cause a serious disadvantage when approaching those pesky boulders.  

Every one of these bumpers come with a universal mounting kit, which means the mounts work for all KJ's and KK's. The bumpers all come with the built in mounting for the winch plate. The bumpers have been designed to accept a particular TJ Wrangler Winch plate that bolts to the top of the bumper and can be purchased on Amazon for about $60 shipped, which is super cheap and already made, so cheaper than I can make them, and I don't have to spend time making them. The mounting system is super easy to install, does not require drilling any new holes, just making four stock holes on each side a little bigger. Installation is so easy you can do it yourself. The bumper weighs about 65lbs with the winch plate. It sticks out about 4" less than the ARB, so approach angle is super awesome. The bumper itself is a three piece design. The universal center section for all KJ's 02-07, that has all the strength with the mounting system to the jeep and for the winch plate, and comes standard with shackle tabs. The second and third pieces are the wings. Why bolt on wings? Easy. They are universal for all KJ's 02-07, except on the 02-04's I simply add a filler piece to the wing to take up the gap from the stock signal housings, so I don't have to make a completely different wing for the two different KJ's. This cuts production time and cost down. Another big bonus to the bolt on wings, is if you get into an accident and damage the bumper, instead of having to scrap and replace the whole bumper, you just replace whichever part is damaged. The wings also can have port holes cut into them to add driving lights if you choose. There is room for up to 4" diameter lights. The three part design also makes shipping super easy and cheaper than an ARB.

So, how is this a "convertible" bumper? It can easily be converted into different configurations depending on your needs and even how you want it to look at the time. You can have the plain bumper, you can add the winch plate, you can add the gaurd with the winch plate, you can add the gaurd without the winch plate, and in the very near future, I will have prerunner tube style "wings" that you can bolt to the center section instead of the plate wings.
 

All bumpers come standard with 3/4" thick recovery tabs and ship bare steel.  Brush guard can be added for additional charge.  If you want the winch plate, search for "Smittybuilt 2801" in the automotive section on Amazon.com. They are usually $60 shipped.  This bumper was designed for this particular winch plate, so if you get something else, it is not gauranteed to fit on the jeep or bumper correctly, although the mounting holes will likely bolt up since it is for a TJ Wrangler winch plate bolt pattern.
 

Phase One:  Simple Rock Monitor bumper with 3/4" recovery tabs.    $625.00 + shipping (Add $75.00 for 2002-04 KJ)

Phase Two:  Rock Monitor bumper with 3/4" recovery tabs and front hitch.    $675.00 + shipping  (Add $75.00 for 2002-04 KJ)

Add Ons:

 Add a grill guard to any of the above phases.    ADD $125.00 + shipping to bumper price

Rock Monitor Front Bumper

for 2008+ Jeep Liberty KK

COMING SOON!